Carbide Rod Blanks

Tungsten Carbide Rod Blanks Tunggal

We manufacture unground carbide rod blanks in stock with HIP sintering and 100% virgin material. Kelas kita kalebu ISO K05 kanggo K40, saka logam baja kanggo logam aluminium, logam non-ferrous, lan titanium utawa kita ngembangake bahan kanggo aplikasi sampeyan.

Kelas submicron MT10S standar digawe saka 10% kobalt lan kalebu akeh aplikasi ing alat pemotong. Kestabilan lan kinerja dhuwur saka seri nggawa akeh keuntungan kanggo pelanggan kita lan inspirasi menyang berkembang produk kualitas. MT25S kelas bahan buta ultra-nggoleki dirancang kanggo pemesinan materi kekerasan kaya baja hardened. Lan MT12s kelas khusus kita dirancang khusus kanggo mesin kasar lan rampung saka stainless steel. Kita uga bisa berkembang kelas anyar kanggo aplikasi tartamtu.

Grade Chart

grade		MT09U	MT10S	MT12S	MT25S	MT06U	MT20.8
Range ISO		K10-K20	K20-K40	K20-K40	K20-K40	K05-K10	K40-K50
WC + karbida liyane	%	91	90	88	88	93.5	85
Lowongan Kerja	%	9	10	12	12	6.5	15
Ukuran wc WC	μm	0.4	0.8	0.6	0.4	0.6	0.8
Kapadhetan	g / ㎝³	14.5	14.42	14.12	14.1	14.85	13.95
kekerasan	Hv30	1890	1600	1580	1750	1890	1350
HRA	93.5	91.5	91.2	92.5	93.5	89.5	89.5
tancep kekuatan pecah	N / mm²	3800	4100	4200	4400	3700	3800
kpsi	551	590	609	638	540	551	551
ketangguhan fraktur	Mpa.m½	10.2	14.2	14.7	13.5	10.1	17.5
modulus enom	kpsi	86780	85360	80860	80000	91000	79086
kompresif kekuatan	kpsi	1145	1015	1010	1109	1156	957

Aplikasi kasebut

Grade	Properti lan aplikasi
MT09U	Ultra-fine grain WC with 9% Co Resistance wear very high and excellent deformation resistance High speed cutting milling, finishing For use on hardened steel, plastics, fiber reinforced materials, HRC55-65
MT10S	Ultra-fine grain WC with 10% Co Resistance wear very high and deformation excellent High speed cutting milling & drilling For general usage and suitable for all kind of material belowHRC45
MT12S	Submicron grain WC with 12% Co High toughness and wear resistance Khusus dirancang kanggo mesin stainless steel Kanggo panggunaan stainless steel, wesi nikel, titanium alloy, lan khusus alloy
MT25S	Wc gandum ultra-halus dengan 12% Co Ketangguhan tinggi dan tahan pakai tinggi Cocok untuk pemrosesan finishing dan roughing baja dengan kekerasan antara 45 dan 55HRC baja untuk perlakuan permukaan, nikel dan nikel paduan
MT06U	Submicron grain WC with 6% Co High wear resistance High speed speed Kanggo pengeboran lan penggilingan komposit plastik, PCB, keramik, kayu, lan MDF
MT20.8	Submicron grain WC with 15% Co High strength and toughness Punching speed-speed Kanggo nggunakake punches carbide solid

PEMENANG FOR QUOTATION

ALL INQUIRY bakal dilindhungi ING 12 HRS