Carbide Rod

Solid Tungsten Carbide Rods

Solid cemented carbide rods are widely used for high-quality solid carbide tools such as milling cutters, end mills, drills or reamers.

Specialized in tungsten carbide round bars, with an outstanding product line of coolant and solid carbide rod, we manufacture and stock unground and ground carbide rods for you. Our h6 polished chamfered carbide rods are the most popular.

Our grade coverage ISO K05 to K40, from machining aluminium, steel, non-ferrous metals, to titanium or we develop grade for your applications. Our 10%cobalt grade MT10A is widely used for machining aluminium and steel or general application. Our 12%cobalt grade MT12U is especially suitable for machining material like stainless steel and composite material.

Cutting Tool Blanks

Cut-to-Length (CTL) Tungsten Carbide Rod, Ground, Polished, Chamfer one end We have one of the largest and most complete lines of ground CTL carbide rods for cutting tool blanks in…

Carbide Rods with Coolant Hole

Coolant Tungsten Carbide Rods with oil duct We produce different types of solid carbide rods with inner coolant holes and different grades in stock,including Carbide rods with 1 Straight coolant oil…

Carbide Rod Blanks

Carbide Rod Blanks Solid Unground Tungsten Carbide Rod Blanks We manufacture unground carbide rod blanks in stock with HIP sintering and 100% virgin material. Our grade includes ISO K05 to…

Three ways to manufacture carbide rod

Extrusion

Extrusion is the most popular method of producing carbide rods. It is a very practical way to manufacture long carbide rods like 330mm.310mm and 500mm, etc. However, its time-consuming drying process is the weakness that we have to pay attention to.

Automatic Press

Automatic pressing is the most effective ways to press short sizes like 6*50,10*75,16*100, etc. It can save cost from cutting carbide rods and it doesn’t need time to dry. So the lead time is faster than extrusion. On the other hand, long rods cannot be manufactured by this method.

Cold Isostatic Press

Cold isostatic press(CIP) is the latest technology of making carbide rods. Because it can make long bars like 400mm but it doesn’t require wax like extrusion, so it doesn’t need time to dry, either. This is the best option when making big diameters like 30mm and 40mm.

Applications of tungsten carbide rods

 Carbide rods are mainly used for drills, end mills, and reamer. It can also be used for cutting, stamping and measuring tools. It is used in the paper, packaging, printing, and non-ferrous metal processing industries. In addition, it is also widely used in the processing of high-speed steel tools, carbide milling cutters, carbide tools, carbide drills, high-speed steel, carbide tools, etc. Carbide rods can be used not only for cutting and drilling tools but also for input needles, various roll wore parts and structural materials. In addition, it can be used in many fields, such as machinery, chemical, petroleum, metallurgy, electronics and defense industries

The Grade Chart

grade MT09UMT10SMT12SMT25SMT06UMT20.8
ISO range K10-K20K20-K40K20-K40K20-K40K05-K10K40-K50
WC+other carbide%9190888893.585
Co%91012126.515
WC grain sizeμm0.40.80.60.40.60.8
densityg/㎝³14.514.4214.1214.114.8513.95
hardnessHv30189016001580175018901350
HRA93.591.591.292.593.589.589.5
transverse rupture strengthN/mm²380041004200440037003800
kpsi551590609638540551551
fracture toughnessMpa.m½10.214.214.713.510.117.5
young’s moduluskpsi867808536080860800009100079086
compressive strengthkpsi11451015101011091156957

The application

GradeProperties and applications
MT09UUltra-fine grain WC with 9%Co Very high wear resistance and excellent deformation resistance High cutting speed milling, finishing For use on hardened steel, plastics, fibre reinforced materials, HRC55-65
MT10SUltra-fine grain WC with 10%Co  Very high wear resistance and excellent deformation resistance High cutting speed milling&drilling For general usage and suitable for all kinds of material belowHRC45
MT12SSubmicron grain WC with 12%Co High toughness and wear resistance Specially designed for machining stainless steel For use on stainless steel, nickel-based alloys, titanium alloy and special alloy
MT25SUltra-fine grain WC with 12%Co Very high toughness and high wear resistance Suitable for finishing processing and roughing of steels with hardness between 45 and 55HRC steels for surface treatments, nickel and nickel alloys
MT06USubmicron grain WC with 6% Co Very high wear resistance High cutting speed For drilling and milling of plastic composites, PCB, ceramics, woods and MDF
MT20.8Submicron grain WC with 15%Co High strength and toughness High-speed punching For use on solid carbide punches

What is ultra-fine cemented carbide?

Ultra-fine grain cemented carbide is a high hardness, high strength and high wear resistance both carbide, and the processing of mutual adsorption – diffusion effect is small, suitable for processing heat-resistant alloy steel, titanium, high High strength non-metallic brittle materials and metal materials such as glass, marble, granite, Plastic reinforced glass fiberboard and other cutting and non-ferrous metals tungsten, molybdenum and other alloy processing.

As the ultra-fine grain cemented carbide with high toughness and strength, high hardness and wear resistance, so as a cutting tool to obtain high-precision edge, allowing the use of large rake angle to ensure sharp blade edge. So that it can withstand a large cutting force, and can get a high finish of the machined surface.

It can improve the precision of the tool and the finish of the machined material by 1 ~ 3, especially in the processing of heat-resistant alloy, titanium alloy, chilled cast iron, and other aspects show good cutting performance. Ultra-fine grain carbide cutting tool processing high-strength steel, heat-resistant alloys, and stainless steel, life than P01 or K10 alloy more than doubled

Ultra-fine grain carbide cutting tool processing these materials better than ordinary carbide cutting tool and the life is more than 10 times higher. The development of ultrafine grain cemented carbide has been developed to build the foundation of cemented carbide end mills and carbide twist drills.

Carbide end mills and twist drills are generally made of high strength, high hardness, ultrafine grain cemented carbide to ensure the cutting performance of the center edge. Carbide end mills are widely used in the mold industry (especially plastic mold industry), the automotive industry, IT and related industries. The plastic industry has a large number of pre-hardened HRC30-34 plastic mold steel as raw materials, in which the hardness of its machinability is poor, only the use of carbide end mills high-efficiency processing of good surface roughness of high precision mode Cavity.

At present, carbide end mills have been used in automobile production lines, IT and related industries extensive use of Ф0.1 ~ 8mm overall carbide end mill processing glass fiber reinforced printed circuit board around and micro-processing.

Solid Carbide Twist Drill is rapidly evolving to meet the high efficiency of the automotive industry and the processing of plastic reinforced glass fiber boards (PCBs) in the IT industry. Drilling on the PCB, the hole of the hole without glass fiber hair, high-speed steel twist drill cannot meet the requirements, and must use the overall carbide twist drill. With the rapid development of electronics, information and other industries, the demand for carbide twist drill will be growing.